Japan KITZ KAIZE stainless steel two-way double acting pneumatic ball valve C-UTE

Before installing the valve, please take care to clean the inside of the piping and keep the inside of the piping clean. When installing a wire-button valve, the piping must be installed according to the specifications of the wire-button specified for the valve, and to prevent deformation of the valve body, be careful not to over-tighten the valve's wire-button. a To prevent leakage, use auxiliary sealing materials, such as duct tape, sealant, etc., when installing a valve. Do not use hemp rope as an auxiliary sealing material. When installing the valve, tighten the valve screws on one side of the pipe. If you apply force with a tool in the opposite direction (5), the valve body may be deformed, damaged, or leak internally or externally (refer to the diagram on the right). When installing the valve, do not apply excessive torque, and use a torque within the following range.

It is recommended that you do not buy low-priced KITZ products, which will bring you a relatively high risk of counterfeiting!

Deppon Express for small items, Deppon Logistics for large items.

Do not support the designated courier

Affected by the epidemic region can not guarantee the time.

Before purchasing the valve must be sure to confirm compliance with the site installation requirements

If in doubt consult customer service.

Please consult customer service before taking the goods in stock, the order will be shipped within 72 hours (excluding holidays)

Buyers to confirm receipt of goods to confirm that the product is no problem contact customer service to provide invoicing information we will be issued the following month for pro and sent.

Please confirm the integrity of the product before returning or exchanging such as indelible marks on the product will not be able to help you for the return or exchange procedures!